डुप्लेक्स और बिल्डर फ्लोर निर्माण

Stilt + 3 or stilt + 4 builder floors in Delhi NCR, Uttar Pradesh and Jharkhand cost ₹2,100 per sq ft for standard finish and ₹2,850 for premium, on total built-up area across all floors. A 200 sq yard stilt + 4 plot with about 5,500 sq ft built-up is roughly ₹115.5 lakh in standard.

That depends on your plot size, road width and the applicable building bye-laws. We check permissible height, FAR and setbacks for your specific plot before we draw anything.

Above a certain height (typically 15 m) a lift is required. Even below that we recommend designing the shaft in from day one; it costs almost nothing now and a fortune later.

Yes, and we design it that way by default — separate water tank compartments, drainage stacks and electricity meters per floor.

14–18 months including the lift, plus 4–8 weeks for design and sanction.

A 1,000 sq ft built-up house in Delhi NCR, Uttar Pradesh and Jharkhand costs about ₹15.5 lakh in basic finish, ₹21.0 lakh in standard, ₹28.5 lakh in premium and ₹39.0 lakh in luxury (2026), excluding land, sanction fees and architect fees of 8–12%.

Roughly ₹42.0 lakh for standard quality and ₹57.0 lakh for premium in Delhi NCR, Uttar Pradesh and Jharkhand. A 2,000 sq ft home is usually G+1 on a 100–150 sq yard plot and takes 10–13 months.

A 30×40 ft plot gives about 1,200 sq ft of plot area; with 65% coverage and two floors you get roughly 1,550 sq ft built-up, which is ₹32.6 lakh in standard finish in Delhi NCR, Uttar Pradesh and Jharkhand. Ground-floor-only is about ₹16.4 lakh.

Labour-only contracts in Delhi NCR, Uttar Pradesh and Jharkhand run ₹340–420 per sq ft for structure and finishing combined. GharVistaar quotes with-material turnkey rates by default, but a labour-plus-supervision rate is available if you buy material yourself.

Thumb rule: about 400 bags of cement, 4,000 kg of Fe500D steel, 8,000 bricks, 50 tonnes of sand and 60 tonnes of aggregate for 1,000 sq ft of RCC-framed built-up area. At current rates that is roughly ₹162,000 of cement and ₹248,000 of steel.

Carpet area is the floor you can walk on inside the walls. Built-up area adds the wall thickness, balconies and the staircase, and is typically 15–20% more than carpet area. Construction rates in Delhi NCR, Uttar Pradesh and Jharkhand are quoted on built-up area.

Yes. Delhi NCR falls in Seismic Zone IV; every structure is designed to IS 1893 and IS 13920 with ductile detailing — closer stirrups at beam-column joints, continuous plinth and lintel bands and proper lap lengths.

AAC blocks are lighter (reduce steel by 5–8%), faster to lay and better insulated; red bricks are cheaper per piece. For G+2 and above we usually recommend AAC; for single-floor homes either works. Both are priced in the BOQ.

Cube tests on every slab (7 and 28 days), slump tests on RMC, steel checked against mill test certificates, 14-day curing, a site engineer every working day and a weekly photo report on WhatsApp. You can send your own engineer to inspect at any stage.

Our turnkey rate is fixed for the contract period (typically 12–18 months). Only if steel or cement moves more than 10% from the BOQ base rate does an escalation clause apply, and it works both ways.

Yes. SBI, HDFC, LIC HFL, PNB and Bank of Baroda give construction loans on owned plots in Delhi NCR, Uttar Pradesh and Jharkhand, usually 75–80% of the estimated construction cost. Banks ask for the sanctioned plan, an estimate from the builder and stage-wise engineer certificates — we provide all three.

Yes. An SPT bore costs ₹8,000–15,000 and decides the footing depth and type. We include it as a separate line in every BOQ.

A duplex is one home spread across two floors with an internal staircase. A builder floor is a stack of independent flats — one per floor — with a common staircase and stilt parking, usually built to sell or rent.

On a 200 sq yard plot with about 5,500 sq ft built-up across four floors, a stilt + 4 builder floor in Delhi NCR, Uttar Pradesh and Jharkhand costs ₹115.5 lakh in standard finish and ₹156.8 lakh in premium, plus ₹8–12 lakh for a lift.

Under the applicable building bye-laws stilt parking is required for most plots above 100 sq m when you build more than two floors. It also raises the living floors above the road and keeps cars off the street.

Delhi, Noida, Greater Noida, Greater Noida West, Ghaziabad, Gurugram and Faridabad in NCR; Ranchi, Jamshedpur, Dhanbad, Bokaro and Hazaribagh in Jharkhand, plus sites within about 100 km of any of these.

B-705, Victory One Central, Sector Omega 1, Greater Noida, Uttar Pradesh 201310. Jharkhand projects are run from Ranchi with local site engineers.

Send your plot size, locality and the number of floors on WhatsApp to +91 88102 41145, use the estimate assistant on this page, or the construction cost calculator. You get a per sq ft estimate today and a free site visit within 48 hours.

Yes. GharVistaar is a registered company; every payment is invoiced with GST, which is also what banks and employers ask for.